(as of [price_update_date] – Details)
DIY Handmade Soap Making Tools
*Material: acrylic and stainless steel
*Specifications: 32.5CM x 21CM x 19CM
This high quality soap cutter is composed of acrylic base, acrylic string knife bow and some accessories, and is also supplied with extra steel wires for spare.
The steel wire of the knife bow has been assembled pre-packed, and the buyer only needs to install the knife bow onto the acrylic base.
1. Put one end of the acrylic knife bow into the mounting bracket of the base and align the screw holes. Then put the cap nut into the nut hole, and then screw the long bolt through the hole into the nut at the other end, and tighten the bolt with the wrench suplied. Note that the bolt should not be tightened too tightly or too loosely, so that the knife bow can cut flexibly. Please align the bow so that wire can align with the notch on the base.
2. Adjust the size adjuster to the required size. Note that because the adjuster is attached to the base for a long time, it may become sticky to the base . At this time, try to peel the adjuster from the base before adjusting.
3. Turn the wire adjustment knob to adjust the wire to a proper state, but not too tight to avoid breaking the wire. Note that this soap cutter is designed for cutting pre-cured soap, not fully cured hardeded soap.
Wire replacement guide:
This step requires tools such as pliers and scissors, please wear gloves to avoid injury.
1. Take the knife bow out of the base.
2. Cut a piece of steel wire approximately 40 cm (16 inches) in length.
3. Tie both ends of the steel wire to the screws on both ends of the knife bow.
Note that the steel wire must pass through the grooves at both ends.
❤ Design: Delicate and flexible design is easy for you to adjust the preferred size. Also, very simple and safe to use, friendly to beginner soap maker.
❤ Feature: Easy to use and clean, scratch-resistant and wear-resistant material, high strength but lightweight.
❤ Application: Suitable for most of soaps, but note: this soap cutter is not suitable for cutting very hard soap.
❤ Specifications: Adjustable Wood Soap Cutter about 12.7″ *8″ *7″ (30CM x 9.5CM x 8CM) , take all the sharp edges off the bar and leave a smooth finish; 3Pcs Set: a string knife, a wave knife, and a soap cutter!